Endpoint Manager

Click Here for Video Guide!

The Endpoint Manager allows you to see/manage endpoints, modify default phone settings, whitelist IPs for your provisioning server, check recent activity of your provisioning server, and check all licensed MAC addresses.

To access the Endpoint Manager page, do the following:

  1. Login to your PBX Admin Portal.
    • i.e. customer.freevociepbx.com/maint
      (replace customer with your system's actual subdomain)
  2. Go to PBX > Endpoint Manager.

Endpoint List

The Endpoint List tab is used to manage and view your added devices.
You can see which extension is connected to which MAC address, as well as its Make and Model.
It will also show if the phone is connected to the system via its Status and the IP it is connected through.

Add New Device

This tab allows you to add in new Endpoints by selecting the extension, Make of the phone,
Model of the phone, and MAC address of the phone.

Import Devices

Using Import Devices, you can upload a .csv list to add multiple new devices all at once.
As specified on the page, column 1 must be the extension number, column 2 must be the MAC address,
column 3 must be the Manufacturer name, and column 4 must be the Model name.

Default Settings

Default Settings allows you to add you to change the default settings of different types of physical phones.


The Provisioning tab is where you would add IP's that your phones will connect through to grab its configuration files.
To add an IP to the whitelist, you would select "Add Entry". Any successfully added entries will be listed below.

Provisioning Logs

Through this tab, you can see all recent activity for your Provisioning server.
This tab can provide you with a confirmation that your registered endpoints are reaching the provisioning
server for its configuration files. It also serves as a way to check what IPs/MACs are attempting contact.


Under the Licenses tab, you will be able to see all of the licensed MAC addresses for your system.
By pressing the "Check for License Update" button, you can refresh your list of Licensed Mac addresses.